Why do I need to hone my tool after sharpening?

Report this post

You say often that honing is a very important part in getting a really sharp edge. Why is that?

Fredrik

2 followers

Comments

When sharpening, you will notice a burr (or wire edge) develop on the upper side of the edge. This need to be removed to get a real sharp edge. You do this on the Tormek machine with the leather honing wheel combined with honing compound for a nice finish.

(If you do not remove the burr, it will break off as soon as you start using the tool, leaving you with a blunt, torn edge.)

Tormek Support
6 May 2022
Are there any plans of making the composite honing wheel to fit a Tormek T-4?

Mindy
22 Mar 2023
Hi Mindy,

We don't have any plans to make a composite honing wheel for the T-4 model in the near future.
/Pontus

Pontus
24 Mar 2023

About the forum

Welcome to the Tormek FAQ!
Browse the most frequently asked questions or ask your own. Feel free to share your Tormek related ideas or suggestions.

The Tormek Team

Mats
Wolfgang
Tormek Support
Hugo
Johan Englund

Tormek is fully focused on sharpening. All the product development, engineering work and production are made in Sweden. The company is located in Lindesberg, a small town in the heart of Bergslagen with a history in mining. The production is carried out in close cooperation with selected suppliers, all specialized and the best in their fields. This ensures the highest quality and a continuous access to the best and most modern manufacturing technology.