To latest comment

length of universal support og Tormek T-7?

I cannot lift it high enough to get a 25 degree angle with KS-123?
If I lift it high enough, i falls off.
ulrik

Comments

  • Hej Ulrik

    When the blade is too high, you can use the smaller stop on the KJ-45 or KJ-140 Centering Knife Jig, you'll gain 2,6 cm.
    A normal blade with a angel of total 25 degree should be not a problem.
    If this isn't enough. you'll need the US-430 Extended Universal Support.
    https://tormek.com/en/products/accessories/us-430-extended-universal-support
    Wolfgang
  • I do not think it is fair to have to buy a new angle adjuster that is marketed as backward compatible, and then find that you cannot sharpen a regular kitchen knife without buying a new bracket for over 600 DKK—bringing the total to about 1,000 DKK just to get the new angle function.
    ulrik
  • Hej Ulrik

    Is the angle of 25 degrees the total angel or each side?
    If 25 degree each side the angel is far to steep and the knife is more blund and act like an axe.
    How wide is the blade?
    A normal kitchen knife is absolutely no problem, an Asian vegetable chopper could be difficult, depending of the width, in some cases you would need the US-430.
    Of course are some size limits, if the blade is extremely wide you can use still the WM-200 AngelMaster.
    It seems there is a misunderstanding in the use of it and the size of the blade/angel.
    Feel free to contact me on support@tormek.se, just send me a picture of your setting and the knife and we will sort it out.
    Wolfgang
  • Ok Thank you.
    I seems I got it to work now👍
    ulrik

Add your comment or create a new post

Your e-mail is hidden and will only be used to notify you. Your name will be shared publicly.